A misbehaving PS5 controller is a major annoyance that makes basic in-game movement and aiming a chore. Here are some tips you can use to resolve the issue and get back in the game.

Possible Causes of Controller Drift
Dust Accumulation is the most general cause of controller drift. The dust accumulated within the sticks and made it defaulted. Most of the time, while we play, we eat simultaneously and hold our controllers with other dirty hands, which also lets the dirt go under the analog sticks. Hence, avoid dust to fix PS5 controller drift.
Wear and tear of internal parts: Sometimes the internal parts get torn on their own, which leads to the deterioration and the drifting of the controller. The sensors get destroyed and register abnormal inputs.
Excessive Pressure on Sticks: When you play aggressively and put excessive pressure on the controller sticks, it gets damaged. It could lead to drifting as well.
Outdated Version: Sometimes our Controller or console is outdated. With the outdated version, it registers ghost movements or the inputs you have not made.
Bluetooth Conflicts: Sometimes only the console’s Bluetooth leads to drifting. It gets stuck on its own and we need to turn off the Bluetooth for a minute and then again turn it on. The problem of drifting simply goes away with this small input.
Damaged Product: Sometimes you get a damaged controller from the store itself. So a damaged controller can not work properly.
Connection Problem: Try checking the internet connection. The slow or faulty connection also disrupts the game experience.

There are many effective ways to fix the issue of controller drift:
Reset the controller: You should first reset the controller when you go through such issues. To reset, you need to press the button for 5 seconds located at the center of the back side of the controller. Now reconnect it with the console.
Thorough cleaning of the controller: It is necessary to thoroughly clean the controller regularly to see the best results. You can use an air spray to clean around the analog sticks and, with the help of a cotton swab, you can wipe the dirt out from the surface of the joystick.
Adjusting input threshold: You can try decreasing the input threshold to the game if it is present in your PlayStation. It would not fix the controller issue but will temporarily make you play without any issues.
Adjust the analog sticks: You can do a little exercise on the analog sticks before starting the game. This could be done by moving the sticks in different directions for some seconds and checking for any obstacle that could hinder you in between your games.
Check for controller updates: Sometimes the controller requires a firmware update in that case it does not work properly. So you need to check for the firmware update. For this, you need to connect the controller to the PS5 and turn the console on. If it requires an update or installation, then it will be shown on your screen.
Console update: Along with updating the PS5 Controller you need to check for the console’s update also. If it requires any update installation, then do it beforehand.
On and off the Bluetooth: You can try doing on and off your console’s Bluetooth as sometimes connectivity issues occur due to Bluetooth conflicts as well. So you need to turn your Bluetooth off for a minute or two then turn it on. Now check whether your controller is working normally or your issue is resolved.
PlayStation support: If you cannot fix the problem, then you can connect to PlayStation support. Here you will get more information and assistance you require.
PlayStation repairs: In case you are not satisfied and not able to fix the issue after doing great efforts then you can go to the PlayStation repairs and get it repaired or replaced.
Get a replacement: Sometimes the store gives you the replacement services if in case the product has been purchased within the past few weeks depending upon their policies. So don’t wait further, just go to the store and get it replaced, if it’s all new.

Things to avoid while fixing the drift:

Don’t separate the parts: It is advised not to open the parts of the controller as you may not have the specialized tools to fix it. So it’s better to take it to the store for recovery. If the product is in the warranty and you have opened its parts then sometimes the store does not accept its warranty claim.
Don’t use water to clean the surface: Do not ever use water to clean the surface as it would get into the inner parts and hinder its working. So it’s better to use alcohol-based solutions available in the market.
Don’t press too hard: While playing the game, the user gets lost and in aggression, he presses the sticks too hard which may damage the controller.
Don’t expose it to high temperatures or dusty places: Always store the controller in a cool place free of dirt. Do not ever expose it to high temperatures or dirt.

Test for PS5 Controller Drift
Before getting into the game, you should check your controller as it may be drifting and can spoil your gaming experience. There is a simple way to check whether your PS5 Controller is drifting or not. There are simple steps on how to fix controller drift ps5.

Step #1: You just need to start a game that requires analog sticks for the movement of the character.

Step #2: Now place the controller down on the flat surface and observe. If the character moves on its own then it is clear that your PS5 Controller is drifting. If it does not then you are good to go with the controller.